Description

The DALY Smart BMS LFP 23S 50A is designed for LiFePO4 battery packs with a 23S series configuration. It is identified by its 50A current rating and is intended for battery systems where the battery chemistry, series count, and current requirements match the specifications of the BMS. This product is sold under the SUPERWAY brand through Superway, while DALY identifies the supplied product brand and model.

A 23S LiFePO4 battery pack contains 23 cell groups connected in series. With a nominal voltage of approximately 3.2V per cell group, the complete battery pack has a nominal voltage of approximately 73.6V. Actual pack voltage varies according to the battery’s state of charge and operating conditions. The charger must be selected according to the cell manufacturer’s charging specifications and the requirements of the complete battery pack.

The 50A current rating is an important consideration when selecting a BMS. The required current depends on the connected application, such as an inverter, motor, or other electrical equipment. Before installation, verify whether the 50A rating refers to continuous current, peak current, or another operating condition by checking the exact product datasheet. Battery cells, cables, connectors, fuses, and connected equipment must also be appropriately rated for the expected current.

This model is intended for LiFePO4 battery projects that use a matching 23S arrangement. Battery chemistry and series count must be confirmed before purchase. LiFePO4 and other lithium battery chemistries have different voltage requirements, so a BMS designed for LFP batteries should not be assumed suitable for other battery types.

Correct installation is essential for proper BMS operation. Follow the connection diagram supplied for the exact model and verify the order of all cell-sensing connections before powering the battery system. Check connection polarity and ensure that all terminals and wires are properly secured. Do not rely only on wire colours or physical positions, because connection arrangements can vary between different models and versions.

The protection functions and additional features depend on the exact circuit design. Consult the product datasheet to confirm the supported protection functions, balancing specifications, communication interfaces, and other technical details. Bluetooth, CAN, UART, RS485, temperature sensors, display support, and specific balancing methods should not be assumed unless they are explicitly confirmed for this model.

When planning a 23S battery pack, consider the battery voltage, expected load, charging requirements, and current demand together. The 50A rating should be checked against the actual requirements of the application. Suitable wiring, connectors, fuses, and other electrical components are also important for a properly planned battery system. Install the BMS according to its official documentation rather than relying on an assumed wiring arrangement.

The DALY Smart BMS LFP 23S 50A is offered through SUPERWAY as part of its BMS and lithium battery accessories range. It is intended for battery builders, technicians, and users working with compatible 23S LiFePO4 battery projects. Before ordering, verify the exact model version, 23S configuration, 50A rating, terminal layout, and required functions against the supplied product information. Selecting a BMS that matches the battery chemistry and configuration is an important step in planning a suitable battery management system.