Description

The DALY Smart BMS LFP 16S 100A is designed for lithium iron phosphate (LiFePO4 or LFP) battery packs arranged in a 16-series configuration. With a specified current rating of 100A, this model is intended for battery applications that require a BMS matched to a 16S LFP battery pack. It is offered under the SUPERWAY selling brand through Superway.

A 16S LFP battery pack consists of 16 cell groups connected in series. Each LFP cell group has a nominal voltage of approximately 3.2V, giving the complete pack a nominal voltage of around 51.2V. The actual charging voltage and operating limits depend on the cell manufacturer’s specifications and the battery pack design. Always confirm that the selected BMS is intended for LiFePO4 chemistry and the exact 16S configuration before installation.

The specified 100A rating is an important selection factor for battery applications. It should be considered alongside the expected load, charging current, inverter requirements, cable capacity, connectors, and installation conditions. The specified rating alone does not confirm the permitted continuous current or peak current duration. Check the manufacturer’s datasheet for these limits before connecting the BMS to a battery pack.

The DALY Smart BMS LFP 16S 100A is intended to provide electronic monitoring and control for the connected battery pack. Exact protection functions and operating characteristics depend on the supplied hardware version. Communication interfaces, balancing specifications, temperature monitoring, and other smart features should not be assumed unless confirmed in the product documentation. Verify the precise model configuration and included accessories before ordering.

Correct wiring is essential for the intended operation of the BMS. The cell sampling wires must be connected in the sequence specified by the manufacturer. Main battery connections, charging connections, and load connections must also follow the supplied wiring diagram. Incorrect connections, reversed polarity, loose terminals, or unsuitable wiring can affect operation and may damage the BMS or battery cells. Use appropriately rated cables, connectors, and insulation for the application.

This model is intended for battery projects requiring a 16S LFP configuration and a specified 100A current rating. Before selecting it, compare the BMS requirements with the battery cell datasheet, charger output, connected equipment, and expected operating current. Confirm the charging voltage and current limits from the cell manufacturer’s documentation, and ensure that the battery pack and BMS specifications match.

SUPERWAY offers the DALY Smart BMS LFP 16S 100A for lithium battery pack projects and related applications. The DALY model identification helps distinguish this product from other BMS configurations, while SUPERWAY is the selling brand. For safe and appropriate use, follow the manufacturer’s installation instructions and technical documentation. If you are unfamiliar with battery wiring or electrical connections, have the installation checked by a qualified battery technician.